Science Arts & Métiers (SAM)

12.4 Hz, k=0 Figure 7: Periodic mode at 12.4 Hz corresponding to a wavenum- ber of 0 4 CONCLUSION A methodology to compute track response in the frequency-wavenumber domain taking

As a conclusion, depending on the morphology of sample 1, there are mainly three zones: Zone A, a solid zone in which the microstructure and the volume fraction of carbides are similar

In order to evaluate the effect of temperature and dynamic strain aging on the fatigue life, simple tensile tests were carried out on the material at 350C, which corresponds to the high

An innovative subdivision-ICP registration method for tool-path correction applied to deformed aircraft parts machining Richard Béarée·Jean-Yves Dieulot·Patrice Rabaté Abstract A new

Figure 6: Example of result for a unit heat flow moving on a plane at 20 m/s milling case Figure 8 describes evolution of maximum temperature obtained by simulation for a unit mobile

In addition, the tensile stresses applied on the shot-sleeve inner surface during the cooling phase combined with the erosion phenomenon caused by the molten brass fall in the second

15.Results of the Bootstrapped Paired Discriminant Analysis applied on the retrieved metallic femoral head showing the ranking of the pairs of roughness parameters with respect to their

b–c Indentation data versus the indenter displacement applied on the TiO2/HAP composite coating for the determination of the b hardness and c elastic modulus before black line and after