Design for maintenance - Science Arts & Métiers (SAM)

Even though the explicit scheme used to solve the equations is physically well posed, mathematical instabilities can occur as a consequence of the iteration errors if the discretisation

For instance, the shape of the force maps as a function of the size parameter D/λ and the space coordinates remains the same for plane standing waves and it is very similar in the case

This can be explained by the fact that the sputtering rate of Al is higher than the Mo one.[10]Finally, as observed in the case of the Cr,AlN coatings and for the same reason, we

The equilibrium phase diagram of zirconium-hydrogen Zr-H system is relatively complex, as the formation of different hydride phases is dependent on hydrogen concentration and cooling

The spec- ifications for the tracers finally read as follows: must be non-toxic in compliance with the RoHS regulations, must not exceed 0.06€/kg of polymer, must improve detection

The dependency of the deposition probability and the dimensionless surface coverage Γ/ΓRSA on the frequency of the pitches λ, the Péclet number Pe and the favorable area fraction θ, as

The total carbon emission in manufacturing a metal part through the casting process, ignoring the emissions produced when manufacturing and assembling any type of machinery used as part

Thus, Eq.17gives a good approximation of the change in the crystallinity ratio for a given decrease of weight average molar mass as long as there are reasonable conver- sions of the