Science Arts & Métiers (SAM)

At a high velocity favoring thin melt- pools and a high laser power promoting elongated melt- pools, the MP become unstable, mainly due to the forma- tion of a vapor recoil pressure

12.4 Hz, k=0 Figure 7: Periodic mode at 12.4 Hz corresponding to a wavenum- ber of 0 4 CONCLUSION A methodology to compute track response in the frequency-wavenumber domain taking

Using a few preliminary cutting operations in various conditions, machined surfaces are measured and the effects of feed rate, depth of cut, cut- ting speed and insert nose radius are

Evolution of rolling resistance factor of rear wheels solid solid line and pneumatic dashed line tires with respect to radius values on a hard smooth and b carpet surfaces... occur for

The robot and the suit don’t really have an identity, they are anonymous, everyone can play these characters." However, some participants formulated interesting remarks in favor of the

On the basis of these estimated models, three amplitude dependent damage indexes are built: one that monitors the shift of the resonance frequency of the structure, another the ratio of

 Focus on Life Cycle Assessment • USEtox model • Limitations • Case studies  Impact of nano-particules  Impact of Chromium • Conclusion April 2018 III International

3.Microstructure changes in austenite and ferrite during aging of AISI 316L SEM examination: a Decomposition ofdferrite after aging for 1 000 h at 550C; b Decomposition ofdferrite after