Science Arts & Métiers (SAM)

Effect of specimen orientation and conditioning on damage mechanisms To describe kinetics and evolution of the six identified mecha- nisms during tensile tests, different measures per

To be sure to not Nomenclature n number of parts X vector of part dimensions Xi ith part dimension Ti Xitarget value ti Xitolerance LSLi,USLirespectively lower and upper specification

Evolution of mechanical properties of aged polyether ketone ketone explained by a microstructural approach Sébastien Rolanda, Mahdi Moghaddama, Sylvie Tencé-Giraulta,b, Bruno Fayollea

The dependency of the deposition probability and the dimensionless surface coverage Γ/ΓRSA on the frequency of the pitches λ, the Péclet number Pe and the favorable area fraction θ, as

Figure 19.Fractured surfaces of the samples: a after the quasistatic tensile test, b after the loading at 1 s−1, and c after the high strain rate tensile tests 100 s−1... Mechanics of

18a shows the Von Mises equivalent stress gradient associated to two different micronotches obtained using micrographic analysis and elastoplastic calculations.. Since there are many

Effect of build orientation and post‑curing of methacrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi‑static to high strain rate

elasto-plastic strain ep plastic strain tensor m Poisson’s coefficient rUTS ultimate tensile strength rY0.2 0.2% yield strength rF fracture stress r stress tensor req equivalent