Science Arts & Métiers (SAM)

The analytic tool pre- sented in this study utilizes an in-process sensing technol- ogy combined with HSC recordings, which allows a syn- chronized analysis of the HSC recordings with

The GranOO workbench, a new tool for developing discrete element simulations, and its application to tribological problems Damien Andréa,⇑, Jean-luc Charlesa, Ivan Iordanoffa, Jérôme

The martensite yield stress at room temperature is chosen in a refer- ence database built as follow: cylindrical specimens are surface induction heat treated and the residual stress

Using a few preliminary cutting operations in various conditions, machined surfaces are measured and the effects of feed rate, depth of cut, cut- ting speed and insert nose radius are

Therefore, we conclude, without any ambiguity that radiation chemistry in reducing conditions in the presence of hydrated electrons leads to the reduction of EDOT monomers and to the

Conclusions The diffusion couple experiments and the comparison with the machining test allow us to make several conclusions: •The titanium matrix and the tool react very rapidly, even

Since one problem of practical importance is to determine the extreme roughness amplitude that will be found in a large scale sam- ple by using a small evaluation length, the procedure

Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting Mahmoud Harzallaha,∗ , Thomas Pottiera, Johanna Senatorea,