Science Arts & Métiers (SAM)

In this paper, residual plastic strain distributions in the machined surface and subsurface, induced by the orthogonal cutting of OFHC copper under practical machining conditions

Conclusions The diffusion couple experiments and the comparison with the machining test allow us to make several conclusions: •The titanium matrix and the tool react very rapidly, even

This work deals with the characterization of an alloy that combines high temperature shape memory effect and high entropy effect features, a NiCuTiHfZr alloy.. The evolution of the

Vertical versus orthogonal distance minimization The evaluation of the effect of fitting data based on vertical and orthogonal distance minimization is achieved here by using the

Figure 19.Fractured surfaces of the samples: a after the quasistatic tensile test, b after the loading at 1 s−1, and c after the high strain rate tensile tests 100 s−1... Mechanics of

Therefore, the results of X- ray tomography were combined to scanning electron microscopy SEM observations in order to quantify seperately the internal damages in the studied aged

b–c Indentation data versus the indenter displacement applied on the TiO2/HAP composite coating for the determination of the b hardness and c elastic modulus before black line and after

In this work, in addition to the study of the lattice parameters and the elastic strain evolution during an in-situ uniaxial tensile, we have brought out the preferential formation and