Science Arts & Métiers (SAM)

Formalization: Given x, y and z, the three vectors containing the components of the 3D coordinates of the Nn nodes of the bar network coupled to the control vertices of the meshes a

Figure 12 shows the evolution of the residual stresses versus the depth be- low the machined and combined machined/treated surfaces obtained using the combined tool for a normalised

Laser Technol.82170–82 [23]Li Z, Jiang Y, Zhou R, Gao F, Shan Q and Tan J 2014 Thermal fatigue mechanism of WC particles reinforced steel substrate surface composite at different

Optical transmittance spectra versus wavelength in the visible region of GLAD titanium thin films deposited on glass substrates with an incidence angle a = 85° and after the annealing

Therefore, we conclude, without any ambiguity that radiation chemistry in reducing conditions in the presence of hydrated electrons leads to the reduction of EDOT monomers and to the

3, a material model to predict theflow behaviour of the Inconel 718 should consider strain hardening up to a strain level of ~ 0.26 followed by a strain softening range where stress

Conclusions The deposition of a 50% WC–Co–Cr/50% Colmonoy 88 coating onto a SAE 4340 steel substrate by thermal spraying gives rise to a deposit with a heterogeneous microstructure and

elasto-plastic strain ep plastic strain tensor m Poisson’s coefficient rUTS ultimate tensile strength rY0.2 0.2% yield strength rF fracture stress r stress tensor req equivalent