Science Arts & Métiers (SAM)

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

Results and discussion Figure 1: Ranking of the situations based on peak values of right and left handrim total force during propulsion Results based on total force are presented on

Ahmadi Institute of Mechanical Engineering I2M, TREFLE department, Arts et Métiers ParisTech - Talence, 33400 Key words: porous media, numerical simulation, inertial effects,

Keywords: Inspirational process, Case study, Conjoint Trends Analysis, CTA method 1 INTRODUCTION This paper describes a research project to model the cognitive processes of designers

& The slug temperature should be optimised in order to: allow the increase of the material desagglomeration and thus decreases the thixoforging load avoid the collapse of the slug

For all of these reasons, a Q4P1 shape function based on global DIC approach has been chosen for the present study, concerning the displacement field measurement during orthogonal

The robot and the suit don’t really have an identity, they are anonymous, everyone can play these characters." However, some participants formulated interesting remarks in favor of the

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/10019 To cite this version : Andrea CARPINTERI, Takamoto ITOH, Thierry