Science Arts & Métiers (SAM)

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase Mariette Moevus•Yves Jorand •Christian Olagnon• Sandrine Maximilien•

Statistical model of the tool/workpiece mechanical interactions in FSW Zakaria Allam1, Chevret Sandra2, Laurent Langlois1, Gabriel Abba1, Régis Bigot1 1 LCFC, ARTS ET METIERS

To conclude, ATBC increases efficiently the elongation at break of PLA while maintaining the permeability coefficient of helium and keeping the barrier properties against oxygen and

https://doi.org/10.1016/j.tsf.2021.138782 Effect of carbon content on structural, mechanical and tribological properties of Cr-V-C-N coatings Linda Aissania,b, Akram Alhusseinc,*,

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

Effect of build orientation and post‑curing of methacrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi‑static to high strain rate

Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting Mahmoud Harzallaha,∗ , Thomas Pottiera, Johanna Senatorea,