Science Arts & Métiers (SAM)

CRITERE DE SECONDE VARIATION D’ENERGIE Nous avons montré que la stabilité de la réponse quasi- statique d’un solide dissipatif standard élasto-plastique ou visco-plastique est assurée

Results and discussion Figure 1: Ranking of the situations based on peak values of right and left handrim total force during propulsion Results based on total force are presented on

Keywords: Inspirational process, Case study, Conjoint Trends Analysis, CTA method 1 INTRODUCTION This paper describes a research project to model the cognitive processes of designers

& The slug temperature should be optimised in order to: allow the increase of the material desagglomeration and thus decreases the thixoforging load avoid the collapse of the slug

To conclude, ATBC increases efficiently the elongation at break of PLA while maintaining the permeability coefficient of helium and keeping the barrier properties against oxygen and

Evolution of rolling resistance factor of rear wheels solid solid line and pneumatic dashed line tires with respect to radius values on a hard smooth and b carpet surfaces... occur for

The main conclusions regarding experimental investigation are listed below: - The uncut chip thickness influences mainly burr height - A transition uncut chip thickness, htr, is

The robot and the suit don’t really have an identity, they are anonymous, everyone can play these characters." However, some participants formulated interesting remarks in favor of the