Science Arts & Métiers (SAM)

In this paper, the term “EP” would imply the illusion of presence experience the sense of pres- ence, while the term “presence” would be reserved for experience of presence in its

Effect of specimen orientation and conditioning on damage mechanisms To describe kinetics and evolution of the six identified mecha- nisms during tensile tests, different measures per

The martensite yield stress at room temperature is chosen in a refer- ence database built as follow: cylindrical specimens are surface induction heat treated and the residual stress

Nomenclature C specific heat J kg−1◦C−1 d laser beam diameter ␮m e piece thickness mm h convective coefficient W m−2◦C−1 i increment nps time step number during welding stage t time

The different works dealing with the influence of aging on the ultimate properties which were achieved on rubber materials Ben Hassine et al., 2014; Colin et al., 2019; Nait Abdelaziz

In addition, the tensile stresses applied on the shot-sleeve inner surface during the cooling phase combined with the erosion phenomenon caused by the molten brass fall in the second

After describing the 3D angle-interlock composite studied in this work, in-plane tensile and shear tests conducted to determine the elastic modulus in both weft and warp directions and

The Visco-Plastic Self-Consistent VPSC model is considered to es- timate the multiscale behavior of the rolled Zn-Cu-Ti sheet, with the required material parameters such as the critical