Science Arts & Métiers (SAM)

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

For all of these reasons, a Q4P1 shape function based on global DIC approach has been chosen for the present study, concerning the displacement field measurement during orthogonal

Evolution of rolling resistance factor of rear wheels solid solid line and pneumatic dashed line tires with respect to radius values on a hard smooth and b carpet surfaces... occur for

The main conclusions regarding experimental investigation are listed below: - The uncut chip thickness influences mainly burr height - A transition uncut chip thickness, htr, is

Journal of Intelligent Material Systems and Structures 1–15 ÓThe Authors 2022 Article reuse guidelines: sagepub.com/journals-permissions DOI: 10.1177/1045389X221111545

The dependency of the deposition probability and the dimensionless surface coverage Γ/ΓRSA on the frequency of the pitches λ, the Péclet number Pe and the favorable area fraction θ, as

Gadaudd aPIMM Laboratory, UMR 8006 CNRS-Arts et Métiers Paristech–CNAM, 75013 Paris, France bICMMO, Université de Paris-Sud, 91405 Orsay, France cCentre des Matériaux, Mines

13.FO around the WL at different distances from the insert tip in the 4 characteristic layers across the thickness for 3 mm plates with slit insert left and 1.5 mm plates with