Science Arts & Mйtiers (SAM)

Thermal oxidation of vinyl ester and unsaturated polyester resins Juan Sebastian Arrietaa,b, Emmanuel Richauda,*, Bruno Fayollea, Fid ele Nizeyimanab aPIMM, Arts et Metiers ParisTech,

In this paper, residual plastic strain distributions in the machined surface and subsurface, induced by the orthogonal cutting of OFHC copper under practical machining conditions

To show the influence that storage can have, two drying simulations with the same global surface area in both collectors were compared: one system without storage consisting of an air

This rather simple model allows a rapid and easy estimation of the KH depth as a function of the operating parameters incident laser power, focal spot diameter, welding speed and

Bennett and McDowell 2003 have used several mechanical quantities the maximum slip amplitude, an equivalent stress inspired by the Dang Van criterion Dang Van, 1973 and an equivalent

As for conductivities, the optical band gaps obtained under the present experimental conditions do not seem to be dependent on the polymer chain lengths see Table 1 nor on the doping

2.3 | Characterization after thermal aging For each aging temperature, the XLPE insulations were frequently removed from the air-ventilated ovens and F I G U R E 2 Single-core

Keywords Fouriertransforminfrared,FT-IR,spectroscopy,imaging,infrared,IR,calibration, paraffin Introduction Fourier transform infrared FT-IR spectroscopy with an array detector is an