Science Arts & Mйtiers (SAM)

For all of these reasons, a Q4P1 shape function based on global DIC approach has been chosen for the present study, concerning the displacement field measurement during orthogonal

To simulate the adhesion of the reactive fluid on the mold surface, we developed a model to fix the fluid particles when they reached a certain viscosity and when they are exposed to a

Three points will be discussed: ➀the high oxidation rate of pDCPD in thin samples and the occurrence of degradation in thick samples where oxygen diffusion is the limiting step, ➁the

As for conductivities, the optical band gaps obtained under the present experimental conditions do not seem to be dependent on the polymer chain lengths see Table 1 nor on the doping

The lack of moist air and the sharp strain gradient on the one hand, and the higher stress triaxiality around an internal pore, on the other hand, cer- tainly make fatigue crack

Adding fillers is known to increase the material stiffness see review1, increase its Mullins softening,2 and delay its fracture in monotonous loading3 as in fatigue.4Increasing the

This so-calledweak inertia regimewas first obtained in the case of periodic homogeneous and isotropic media but was extended to the case of anisotropic ones with the restriction of

[18] A framework which integrates quality function deployment and design structure matrix to support product design planning Based on many years of experience of working in industry