After reading this guide, pass it on to the end user to keep for future reference. To reduce the risk of short circuit, current leakage, electric shock, malfunction, smoke or fire, do not wash the controller with water or other liquid. To reduce the risk of electric shock, malfunction, smoke or fire, do not operate the switches/buttons or touch other electrical parts with wet hands.
To avoid damage to the controller, use appropriate tools to install, inspect, or repair the controller. To prevent discoloration, do not use benzene, thinner or chemical cloth to clean the controller. Refer to the button function guide that appears at the bottom of the LCD for the functions they serve on a given screen.
When the system is centrally controlled, the function guide of the button corresponding to the locked button is not displayed. Auto Drop Plate ..See the instruction manual that came with the Auto Lift Plate.
Main
When "LED Lighting" is set to "No", the ON/OFF lamp will not light.
Operation mode
Preset temperature
2 Press the F1 or F2 button to move the cursor to the desired temperature setting (cooling or heating). The default temperature settings for cooling and heating in Auto mode (dual set point) are also used by Cooling/. The minimum temperature difference requirement between the preset cooling and heating temperatures (varies with connected indoor unit models) is met.
If the preset temperatures are set in a way that does not meet the minimum temperature difference requirement, both preset temperatures will automatically change within the allowable settings. Auto (Dual setpoints) [C ool] Preset temperature range for cooling mode [H eat] Preset temperature range for heating mode Fan/ventilation Cannot be set.
Fan speed
OU silent mode Use to set time periods during which silent operation of the outdoor units takes precedence over temperature control. Schedule Set the start/end time for the units to operate in energy saving mode for each day of the week and set the energy saving level. Use to invert the colors on the screen by changing the white background to black and black characters to white.
Error code, error source, chiller address, unit model, production number, contact information (dealer phone number) may be displayed. Main” appears in the title of the main menu on the main remote control.
Accessing the Main menu
Item selection
Accessing the menu
Vane setting
Louver setting
Ventilation setting
Returning to the Operation menu
High power operation function allows the units to operate at higher than normal capacity so that the room air can be quickly conditioned to an optimum temperature. This operation will last up to 30 minutes, and the unit will return to normal operation mode at the end of the 30 minutes or when the room temperature reaches the preset temperature, whichever is earlier. The units will return to normal operation when the operating mode or fan speed is changed.
Manual vane angle Main OFF
Select the chiller address and unit number for the units on whose sheets they will be fixed, with the F2 or F3 button and press the SELECT button. Press the F3 or F4 key to scroll through the following options and select the desired setting. Press the F3 button to view models 5 to 8. Press the F4 button to display the status of Setting 2. Press the SELECT button to go to the setting screen.
Move the cursor to the desired day of the week with the F1 or F2 button and press the F3 button to select it. To activate this option, move the cursor to "Yes" with the F3 or F4 button and press the SELECT button. To make or change the setting, move the cursor to the desired day of the week with the F1 or F2 button and press the F3 button to select it.
1 Select "Energy saving" in the main menu (see . page 20) and press the SELECT button. Move the cursor to "Auto Return" with the F1 or F2 button and press the SELECT button. Press the SELECT button to go to the setting change/. the screen for selecting the day of the week.
2 Move the cursor to "Basic setting" with the F1 or F2. button, and press the SELECT button. and press the SELECT button. Increase or decrease the value for the selected item with the F3 or F4 button, and press the SELECT button. 1 Select "Display Setting" from the Initial Settings menu. and press the SELECT button. button, and press the SELECT button.
Black and white inversion setting Pg. 1 Select “Display Setting” from the Initial Settings menu,. and press the SELECT button. button, and press the SELECT button. select the display mode “Yes” or “No” with the F3 or F4 button, and press the SELECT button. 2 Press the F4 button or the ON/OFF button to reset the error that occurs.
Checking the error information
The following screen will be displayed for the 3D i-See sensor panel model when the unit is stopped due to the Auto-OFF function without being occupied by the power saving option. When displayed on the main screen in full mode, the system is centrally controlled and the filter mark cannot be reset. If two or more indoor units are connected, the filter cleaning time for each unit may be different, depending on the filter type.
The icon appears when the filter on the main unit needs to be cleaned. When the filter mark is reset, the cumulative operating time of all units is reset. The icon is intended to appear after a certain usage time, based on the assumption that the indoor units are installed in a room with normal air quality.
Can be used in combination : Cannot be used in combination : Limited 1: This function is activated after the high power operation is completed due to high power.
