Поведение стационарных физических полей в окрестности угловой точки линии раздела кусочно-однородного анизотропного тела. Behaviour of stationary physical fields in the vicinity of angle point of the separation line of piecewise-homogeneous anisotropic me

Performed tests have shown that application of phosphorus in form of CuP10 and AlSr10 master alloy as an inoculant gives positive results in form of refinement of primary crystals

[r]

[r]

Because of the increas- ing the speed of the decomposition of the anhydrite, together with the growth of the temperature of casting the bronze to the plaster mould, the gases

Power demand of the mixer’s drive reveals the mixer’s operating characteristics and reliable monitoring of the mixing processes involving the evaluation of power consumption

In the presented analysis, we have explored the characteristics of melting heat transfer in the MHD stagnation point flow of Jeffrey fluid induced by an impermeable

The two points considered at the alternate sides, of the tangents through the diameter of the circle, and then the line joining these points divides the circle

At the first stage of the measurements results analysis, the gear wheel cast surface image was compared with the casting mould 3D-CAD model (fig.. Next, the measurements results