Теплообемен при плоском течении несимметричной жидкости в окрестности критической точки Heat transfer under plane flow of asymmetric fluid in the neighbourhood of critical point

The evolution of temperature profiles and weld pool geometry during dissimilar welding between 2205 duplex stainless steel and A36 low carbon steel using keyhole plasma arc welding

We consider the flow and heat transfer characteristics of an unsteady, incompressible, viscous and electrically conducting micropolar fluid in a porous channel with expanding

The above literature review revealed that no study has yet to be conducted on heat transfer in mixed convection flow of ferrofluid inside a vertical channel in the presence of

The variation of Sh with buoyancy ra tio ‘N’ shows that when molecular buoyancy force dominates over the thermal buoyancy force, the rate of mass transfer reduces on

In the presented analysis, we have explored the characteristics of melting heat transfer in the MHD stagnation point flow of Jeffrey fluid induced by an impermeable

[r]

When near outlet is closed, an improvement in mixed to dead volume of about 34% and plug to dead volume of about 116% inside the tundish was observed as compared to the case of

Consider a steady, laminar boundary layer flow of a viscous, incompressible and electrically conducting fluid in the presence of a strong magnetic field B(x)