• Nenhum resultado encontrado

Effect of working parameters and nozzle wear rate onto the spray quality in use of different fan flat nozzle

N/A
N/A
Protected

Academic year: 2017

Share "Effect of working parameters and nozzle wear rate onto the spray quality in use of different fan flat nozzle"

Copied!
15
0
0

Texto

Loading

Imagem

Figure 1. Demosntration image of drops on the model surface.
Figure 2. Droplet size analysis test stand.
Figure  5  shows  graphic  interpretation  of  the  results  concerning  the  number  of  droplets per 1 cm 2  as a function of changes in working pressure and working speed
Figure 4. Changes in coverage degree as a function of changes in working pressure  (respectively for a new nozzle and 5% and 10% wear rates)
+6

Referências

Documentos relacionados

A prestação de cuidados na comunidade sempre existiu. Desde Nightingale, que a enfermagem desenvolve trabalhos na área da saúde comunitária, o que contribuiu para

As doenças mais frequentes com localização na cabeça dos coelhos são a doença dentária adquirida, os abcessos dentários mandibulares ou maxilares, a otite interna e o empiema da

No grupo de intervenção (GI), 60 mulheres foram submetidas a um programa de fisioterapia com início entre 3-5 dias após a cirurgia, incluindo drenagem linfática

Column D fe1 represents fractal dimension for every nozzle, taking into account data from operating pressure of 0.2 and 1 MPa, and D v (droplet size spectra factors)

The displacement speed did not influence the application efficiency for nozzles with the same drop pattern, and the obtained spray coverage and deposits at the medium and bottom

In the present study, some women recognize that the relationship is a stable vulnerability factor for the other women, since the length of the relationship is very common

Spray nozzle: description (type/model) - Spray discharge angle and droplet spectrum - Operating pressure used and how it was maintained - Application rate: volume of

The droplet velocity showed little variation between the nozzles with and without air induction with the same pressure and flow rate, however, spray nozzles