Effect of Aging Heat Treatment H950 and H1000 on Mechanical and Pitting Corrosion Properties of UNS S46500 Stainless Steel

Influence of the grain size on deleterious phase precipitation in superduplex stainless steel UNS

This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS), describing the phase transformations that occur in isothermal aging between

The Effect of Weld Geometry and Post-Weld Heat Treatment on the Corrosion Behaviour of Austenitic Stainless Steel Immersed in 1.0 M NaCl Solution.. Oladele Isiaka Oluwole,

In the present study, the objective is to obtain a carbon layer on AISI 430 stainless steel to improve the corrosion and hardness proprieties of this material using

Effect of heat input on mechanical and metallurgical properties of AISI:410S lean super martensitic stainless steel weld joint by GTAW process was investigated.. Based on the

that mechanical properties, such as toughness and hardness, are more susceptible to aging, having already been afected during the irst 4 hours of heat treatment, while the

The 55%Al-Zn coated steel showed higher yield and tensile strength and lower total elongation and hardening coefficient compared to zinc coated steel and the coating showed

The pitting corrosion susceptibility of the oxide ilms formed on the stainless-steel samples in the three situations (as received and grown in the presence and