Effect of residual Al content on microstructure and mechanical properties of Grade B+Steel for castings for locomotives

In overall, the formation of new strain-free grains associated with {111}//ND and {110}//ND directions corresponded to the dense planes in BCC structure, regardless to the fact that

The use of magnetrons on the target and the application of high power impulses allows a higher degree of ionization combined with better densification and reduction or

The effect of heating temperature during the heat treatment processes and quenching media on the tensile strength , percentage of elongation , hardness,

Compared with as-cast AZ80 alloy, yield strength of the alloys with solid solution treatment remarkably decreased, while the tensile strength and ductility increased

Investigation on the microstructure and properties of HSS reveals that inoculation of HSS by ferrovanadium can break up the coarse continuous carbide network,

[r]

The effect of nanometric zirconia particle additives on microstructure and mechanical properties of dense alumina.. Lukasz Zych, Radoslaw Lach, Krzysztof Haberko * , Pawel

Descriptive statistics for measuring the surface area the primary precipitates of intermetallic phases IM_W\ κ I (Sap_IM_W\ κ I, μ m 2 ) depending on the annealing time ( τ _ia,