• Nenhum resultado encontrado

Hazards caused by natural and anthropogenic changes of catchment area in karst

N/A
N/A
Protected

Academic year: 2017

Share "Hazards caused by natural and anthropogenic changes of catchment area in karst"

Copied!
7
0
0

Texto

Loading

Imagem

Fig. 1. Time and space scale effects of different factors causing changes of the catchment in karst.
Fig. 2. The map with indicated positions of the seven study areas.
Fig. 5. Photograph of canalization of the Trebiˇsnjica River water- water-course by building a concrete canal.
Fig. 6. The cross-section A-A given on the Fig. 4 with designated positions of the Ombla Spring, the HEPP Ombla underground dam (in project), the location of three deep piezometers (P9, P6, P18), the state boundary between Croatia and Bosnia and Herzegovin

Referências

Documentos relacionados

Tabela 1 - Características de amido de diferentes fontes...23 Tabela 2 - Resumo das principais propriedades das macromoléculas que compõem o amido...26 Tabela 3 - Cristalinidade do

Quando ligar um televisor Sony, a entrada pode ser seleccionada automaticamente carregando no botão de entrada após a configuração (Entrada SYNC) - avance para o passo 5.. 4

The fourth generation of sinkholes is connected with the older Đulin ponor-Medvedica cave system and collects the water which appears deeper in the cave as permanent

A reconstruction of the past annual precipitation rates for the last 280 years has been obtained from speleothem annual growth rates, derived from the

It is stored in numerous caves, in the hard disks of the Quaternary and in the continental and marine sediments of Aegean Archipelago wider area.. We are still

Troglobitic catfishes have been found in two cave systems in the Enfurnado karst area: Gruna do Enfurnado, type-locality and only known habitat for Rhamdia enfurnada, and Água

Em resumo, podemos dizer que, a partir da influência do filósofo e geômetra francês Blaise Pascal, assim como de outros moralistes fran- ceses, como La Rochefoucauld (1613-1680),

Neste trabalho o objetivo central foi a ampliação e adequação do procedimento e programa computacional baseado no programa comercial MSC.PATRAN, para a geração automática de modelos