Documentos relacionados
As shown in Fig 4, all soil-cement bricks added with solid waste presented values of water absorption below 20%, indicating their conformity for industrial production of
The prepared supports offered high porosity (54%), good average pore size (6 μm) and a uniform pore size distribution (mono-modal). It possibly can be used under severe
The results of particle size distribution showed that the clay samples have similar physical characteristics to bentonite clays of Boa Vista, Paraíba.. Results of X-ray
Figure 1: X-ray diffraction pattern of b -CPP powder. Corrêa et al.. 4 shows the results of thermogravimetric analysis of b -CPP. As may be observed, the b -CPP powder exhibited
Universidade Federal do ABC - UFABC Luiz Fernando Grespan Setz Universidade Federal do ABC - UFABC Marcelo Rodrigues Sampaio Mineração Baruel Ltda. Monica Chiusano
Therefore, the purpose of this study was to determine the biaxial lexural strength of a sintered CAD/CAM leucite- reinforced glass-ceramic, as a function of the surface
The basal spacing values are essentially the same for 50tioMMT, 100tioMMT and 150tioMMT, contrary to the typical increase observed when large quaternary ammonium cations, such
[9] also published results where roof tiles samples containing 5% to 30 wt% of granite waste show that coarse granite fraction leads to lower water absorption and lexural