• Nenhum resultado encontrado

Lat. Am. j. solids struct. vol.13 número8

N/A
N/A
Protected

Academic year: 2018

Share "Lat. Am. j. solids struct. vol.13 número8"

Copied!
2
0
0

Texto

(1)

1614

Erratum

http://dx.doi.org/10.1590/1679-78252162a

In the article Free Vibration of Laminated Composite Plate with Shape Memory Alloy Fibers, published in volume 13, number 2, 2016:

In the part of authors:

M. Daneshpazhooh c

Should read:

M. Danesh Pazhooh c

The affiliation of all three authors:

Amirkabir University of technology (Tehran Polytechnic)

Should read:

AmirKabir University of Technology (Tehran Polytechnic)

In the first line of the last paragraph of the page 322:

In Table 2, the result of first dimensionless fundamental natural frequency parameter…

Should read:

(2)

Erratum 1615

 

Latin American Journal of Solids and Structures 13 (2016) 1614-1615

In the third line of the first paragraph of the page 323:

Strikanth (2003)

Should read:

Srikanth (2003)

In the Table 2 of the page 323:

(Strikanth et al,2003)

Should read:

(Srikanth et al,2003)

In the header of the forth column in the Table 3 of the page 323:

Strikanth (2003)

Should read:

Referências

Documentos relacionados

[r]

Bureau of Indian

This study has investigated the effect of Young’s modulus variations of the disc brake compo- nents on the squeal propensity using a detailed three dimensional finite element

strain gauges with bending deformations of each elastic beam, but only strain gauges (No. 24-32) on the dual surface of the beams have inertia components coupled into F y output..

Furthermore, the tip displacements at different firing angles were determined by transfer- ring the mass, stiffness and damping matrices of the barrel with the addition of

Secondly, a comparison of the vertical displacement of the rail top between the granular wedge and the new transition wedge with optimum Young’s modulus of the support soil is

In order to study the effectiveness of the dampers in the stay cables modeled, a viscous and a friction damper are employed to mitigate the response of the cable subjected

The values of non-dimensional stress intensity factors for pure mode-I, pure mode-II, and pure mode-III were obtained using 3D models of new loading device and modified Arcan