Science Arts & Métiers (SAM)

CRITERE DE SECONDE VARIATION D’ENERGIE Nous avons montré que la stabilité de la réponse quasi- statique d’un solide dissipatif standard élasto-plastique ou visco-plastique est assurée

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

The significant increase of the compressive stress and the changes in the mechanical properties hardness and elastic modulus observed at 50% nitrogen concentration in the plasma may be

Statistical model of the tool/workpiece mechanical interactions in FSW Zakaria Allam1, Chevret Sandra2, Laurent Langlois1, Gabriel Abba1, Régis Bigot1 1 LCFC, ARTS ET METIERS

https://doi.org/10.1016/j.tsf.2021.138782 Effect of carbon content on structural, mechanical and tribological properties of Cr-V-C-N coatings Linda Aissania,b, Akram Alhusseinc,*,

The measurement of glassy transition temperature Tg by differential scanning calorimetry measurements DSC and dynamical mechanical thermal analysis DMTA have shown a partial miscibility

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

Effect of build orientation and post‑curing of methacrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi‑static to high strain rate