Science Arts & Métiers (SAM)

Ahmadi Institute of Mechanical Engineering I2M, TREFLE department, Arts et Métiers ParisTech - Talence, 33400 Key words: porous media, numerical simulation, inertial effects,

Statistical model of the tool/workpiece mechanical interactions in FSW Zakaria Allam1, Chevret Sandra2, Laurent Langlois1, Gabriel Abba1, Régis Bigot1 1 LCFC, ARTS ET METIERS

Evolution of mechanical properties of aged polyether ketone ketone explained by a microstructural approach Sébastien Rolanda, Mahdi Moghaddama, Sylvie Tencé-Giraulta,b, Bruno Fayollea

Technol.201, 4329–4333 2006 Ding, X., Zeng, X.: Structural, mechanical and tribological properties of CrAlN coatings deposited by reactive unbalanced magnetron

16 Schematic of the designed extrusion device to printing continuous carbon fiber reinforced PLA [38] Table 4 Statistic results of tensile and flexure strength of three different

Effect of build orientation and post‑curing of methacrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi‑static to high strain rate

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/9594 To cite this version : Christian DUPARQUE, Louis AUGUSTINS, Franck

Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting Mahmoud Harzallaha,∗ , Thomas Pottiera, Johanna Senatorea,