View/Open - Science Arts & Métiers (SAM)

The optimisation is performed with NSGA-II algorithm which may choose technical parameters blade length, transmission ratio or electro-mechanical coefficient in this example to maximise

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

The significant increase of the compressive stress and the changes in the mechanical properties hardness and elastic modulus observed at 50% nitrogen concentration in the plasma may be

Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase Mariette Moevus•Yves Jorand •Christian Olagnon• Sandrine Maximilien•

For all of these reasons, a Q4P1 shape function based on global DIC approach has been chosen for the present study, concerning the displacement field measurement during orthogonal

Milled fan black, rotomoulded with closed surfaces fan red and rotomoulded with open surfaces fan blue The spectra at partial flow rate Figure 7 are similar to those from the nominal

Box 10 0 0, FIN-02044 VTT, Espoo, Finland Keywords: Silane cross-linked polyethylene Radio-thermal oxidation Analytical kinetic model Hydroperoxide decomposition Carbonyl build-up

https://doi.org/10.1016/j.tsf.2021.138782 Effect of carbon content on structural, mechanical and tribological properties of Cr-V-C-N coatings Linda Aissania,b, Akram Alhusseinc,*,