Science Arts & Métiers (SAM)

The optimisation is performed with NSGA-II algorithm which may choose technical parameters blade length, transmission ratio or electro-mechanical coefficient in this example to maximise

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

The significant increase of the compressive stress and the changes in the mechanical properties hardness and elastic modulus observed at 50% nitrogen concentration in the plasma may be

Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase Mariette Moevus•Yves Jorand •Christian Olagnon• Sandrine Maximilien•

Statistical model of the tool/workpiece mechanical interactions in FSW Zakaria Allam1, Chevret Sandra2, Laurent Langlois1, Gabriel Abba1, Régis Bigot1 1 LCFC, ARTS ET METIERS

2 aExprimental setup,bShear and compression specimens In order to determine the mechanical behavior of the Ti17 alloy under extreme conditions, both compression and shear tests have

Effect of build orientation and post‑curing of methacrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi‑static to high strain rate

Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting Mahmoud Harzallaha,∗ , Thomas Pottiera, Johanna Senatorea,