Science Arts & Métiers (SAM)

In fl uence of injection molding on the electrical properties of polyamide 12 fi lled with multi-walled carbon nanotubes Sophie Versavauda, Gilles R egniera,*, Gw ena€ el Gouadecb,c,

In order to evaluate the effect of temperature and dynamic strain aging on the fatigue life, simple tensile tests were carried out on the material at 350C, which corresponds to the high

However, to our knowledge, the influence of the angular distribution of the light source ballistic, diffuse or Lambertian on Nomenclature µsi scattering coefficient of the layer i µ’si

https://doi.org/10.1016/j.tsf.2021.138782 Effect of carbon content on structural, mechanical and tribological properties of Cr-V-C-N coatings Linda Aissania,b, Akram Alhusseinc,*,

The total carbon emission in manufacturing a metal part through the casting process, ignoring the emissions produced when manufacturing and assembling any type of machinery used as part

 Focus on Life Cycle Assessment • USEtox model • Limitations • Case studies  Impact of nano-particules  Impact of Chromium • Conclusion April 2018 III International

The cold rolled CR and cold rolled aged CR/573K‐0.6ks/WQ and CR/573K‐7.2ks/WQ specimen revealing a strong hardening under tension have quite close fatigue life performances under 3%, 2%

This provides a first explanation of the fatigue life reinforcement or the crack propagation resistance increase for non- relaxing conditions: by enabling strong secondary crack