Science Arts & Métiers (SAM)

Formalization: Given x, y and z, the three vectors containing the components of the 3D coordinates of the Nn nodes of the bar network coupled to the control vertices of the meshes a

For instance, the shape of the force maps as a function of the size parameter D/λ and the space coordinates remains the same for plane standing waves and it is very similar in the case

& The slug temperature should be optimised in order to: allow the increase of the material desagglomeration and thus decreases the thixoforging load avoid the collapse of the slug

The dependency of the deposition probability and the dimensionless surface coverage Γ/ΓRSA on the frequency of the pitches λ, the Péclet number Pe and the favorable area fraction θ, as

In addition, the tensile stresses applied on the shot-sleeve inner surface during the cooling phase combined with the erosion phenomenon caused by the molten brass fall in the second

Hardness-load modelling To predict the hardness variation as a function of the applied load, or in the same way as a function of the indenter displacement, the application of the model

The displacement represents the distance measured by DIC between two points located on the compression diagonal at 45◦to the rails passing through the centre of the shear area

Crack delamination appears at inclined drilling in the TBC at the BC/TBC interface at the leading edge but only from the second laser pulse when the laser beam interacts with the