Science Arts & Métiers (SAM)

Figure 9: Slice of the mesh created by the Marching Cubes algorithm from the dense point cloud presented in 7c corresponding to the column highlighted in 7a, before smoothing a and

Results and discussion Figure 1: Ranking of the situations based on peak values of right and left handrim total force during propulsion Results based on total force are presented on

12.4 Hz, k=0 Figure 7: Periodic mode at 12.4 Hz corresponding to a wavenum- ber of 0 4 CONCLUSION A methodology to compute track response in the frequency-wavenumber domain taking

Milled fan black, rotomoulded with closed surfaces fan red and rotomoulded with open surfaces fan blue The spectra at partial flow rate Figure 7 are similar to those from the nominal

Figure 6: Example of result for a unit heat flow moving on a plane at 20 m/s milling case Figure 8 describes evolution of maximum temperature obtained by simulation for a unit mobile

Figure 2:Master curves identified on the experimental mass variation measured after time shifting to the reference temperatureθref= 150°C for a the ventilated oven and b saturated steam

Effect of Foam Bubble Size on Foam Rheology.In Figure 12, the results of apparent viscosity as a function offlow rate are compared in 1 mm GB main column, in which foam was pregenerated

Figure 19.Fractured surfaces of the samples: a after the quasistatic tensile test, b after the loading at 1 s−1, and c after the high strain rate tensile tests 100 s−1... Mechanics of