Science Arts & Métiers (SAM)

Formalization: Given x, y and z, the three vectors containing the components of the 3D coordinates of the Nn nodes of the bar network coupled to the control vertices of the meshes a

For instance, the shape of the force maps as a function of the size parameter D/λ and the space coordinates remains the same for plane standing waves and it is very similar in the case

Hyperbola method, PDF contour of the estimated locations for the impact of size 20mm and the actual damage location white cross.. The performance quantification is done thanks to the

On the basis of these estimated models, three amplitude dependent damage indexes are built: one that monitors the shift of the resonance frequency of the structure, another the ratio of

In addition, the tensile stresses applied on the shot-sleeve inner surface during the cooling phase combined with the erosion phenomenon caused by the molten brass fall in the second

Hardness-load modelling To predict the hardness variation as a function of the applied load, or in the same way as a function of the indenter displacement, the application of the model

The displacement represents the distance measured by DIC between two points located on the compression diagonal at 45◦to the rails passing through the centre of the shear area

The proposed proce- dure AK-ILS takes advantage of several points of the literature review: •the Hammersley sequence for the initial design of experiments, •the Kriging metamodel