Science Arts & Mйtiers (SAM)

The scenario leading to these markers seems to be the same in the whole observed volume: the initiation phase is driven either by damage atfibre ends or a zone of confined matrix between

Observation function l Interpretation function d Aggregation function f Indicator function u Preference Notation lv dV fv uv¼fvdvlv Performance v¼uvðXÞ Knowledge setting Physics,

In this paper, residual plastic strain distributions in the machined surface and subsurface, induced by the orthogonal cutting of OFHC copper under practical machining conditions

To show the influence that storage can have, two drying simulations with the same global surface area in both collectors were compared: one system without storage consisting of an air

This rather simple model allows a rapid and easy estimation of the KH depth as a function of the operating parameters incident laser power, focal spot diameter, welding speed and

Bennett and McDowell 2003 have used several mechanical quantities the maximum slip amplitude, an equivalent stress inspired by the Dang Van criterion Dang Van, 1973 and an equivalent

To simulate the adhesion of the reactive fluid on the mold surface, we developed a model to fix the fluid particles when they reached a certain viscosity and when they are exposed to a

As for conductivities, the optical band gaps obtained under the present experimental conditions do not seem to be dependent on the polymer chain lengths see Table 1 nor on the doping