REFERENCES BIBLIOGRAPHIQUES Abraham, S., Pai, B. C. et al. (1990).
“Studies on nickel coated carbon fibres and their composites.”
Journal of Materials Science, 25, 2839-2845.
Amateau, M.F. (1976).
“Progress in the Development of Graphite/Aluminum Composites using Liquid Infiltration Technology.”
Journal of Composite Materials, 10, 279-296.
Aoki, S., Kishimoto, K. et al. (1988).
“Analysis of Potential and Current Density Distributions Using a Boundary Element Method.”
Corrosion, 44, 12, 926-932.
Arnott, D.R., Hinton, B.R.W. et al. (1986).
Corrosion 86, NACE, Paper n° 197.
Aylor, D. M., Ferrara, R. J. et al. (1984).
“Marine corrosion and protection for graphite/aluminum metal matrix composites.”
Materials Performance, 7, 32-38.
Aylor, D. M., Moran, P.J. (1985a).
“Effect of Reinforcement on the Pitting Behavior of Aluminum-Base Metal Matrix Composites.”
Journal of the Electrochemical Society, 132, 6, 1277-1281.
Aylor, D. M., Kain, R.M. (1985b).
“Recent Advances in Composites in the United States and Japan.”
Ed. J.R. Vinson, M. Taya, STP864, ASTM, Philadelphia, PA.
Aylor, D. M., Moran, P. J. (1986).
“Pitting Corrosion of 6061 Aluminum Alloy Foils in Sea Water.”
Journal of the Electrochemical Society, 133, 5, 949-951.
Aylor, D. M. (1990).
“Corrosion of Metal-Matrix Composites.”
Metals Handbook, 9th ed., Vol. 13 – Corrosion, p.859.
American Society for Metals, Metals Park, Ohio.
Baboian, R., Pohlman, S.L. (1990).
“Galvanic Corrosion.”
Metals Handbook, 9th ed., Vol. 13 – Corrosion, p.83.
American Society for Metals, Metals Park, Ohio.
Bard, A.J., Faulkner, L.R. (1983).
Electrochimie – Principes, méthodes et applications.
Ed. Masson, Paris
Bardal, E., R. Johnsen, et al. (1984).
“Prediction of Galvanic Corrosion Rates and Distribution by Means of Calculation and Experimental Models.”
Corrosion, 40, 12, 628-633.
Barralis, J., Maeder, G. (1986).
Précis de métallurgie.
3ème éd., Ed. Nathan, 124-131.
Bhagat, R. B., Amateau, M. F. et al. (1989).
“Squeeze Cast Metal Matrix Composites : Evaluation of Their Strength, Damping Capacity and Corrosion Resistance.”
Journal of Composite materials, 23, 9, 961-975.
Bittner, D., Kotte, R. (1992).
“The Coating of Carbon Fibre Reinforced Composite (CCC) - Research, Development and Application.”
Pmi, 24, 5, 291-295.
Boffardi, B.P. (1990).
“Control of Environmental Variables in Water Recirculationg Systems.”
Metals Handbook, 9th ed., Vol. 13 – Corrosion, p.487.
American Society for Metals, Metals Park, Ohio.
Brebbia, C.A. (1978).
The Boundary Element Method for Engineers.
Pentech Press, London.
Bucaille, P., Oltra, R. et al. (1995).
“Etude de la corrosion galvanique par profilométrie laser. Application aux alliages d'aluminium.”
Revue de Métallurgie – CIT/Science et Génie des Matériaux, 9, 1075-1081.
Bucaille, P. (1997a).
“Etude expérimentale et modélisation B.E.M. des phénomènes de couplage galvanique dans les cas d’une évolution des distributions du potentiel et du courant.”
Thèse, Université de Bourgogne.
Bucaille, P., Oltra, R. et al. (1997b).
“Theoritical and experimental studies of galvanic corrosion between aluminium and Al-4%Cu alloys.”
Materials Science Forum, 242, 207-212.
Buff, H. (1857).
Liebigs Ann. Chem., Vol. 102, 265-284.
Chen, X., Zhen, G. et al. (1996).
“A TEM study of the interfaces and matrices of SiC-coated carbon fibre/aluminium composites made by the K2ZrF6 process.”
Journal of Materials Science, 31, 4297-4302.
Cheng, H.M., Zhou, B.L. et al. (1990).
“Chemical Silver Plating on Carbon Fibers.”
Plating and Surface Finishing, 11, 130-132.
Clement, J. P., Rack, H. J. (1989).
“Interfacial Modification in G/Al Metal Matrix Composites.”
Symp. High Temp. Compos., Proc. Am. Soc. Compos., Ed. Technomic, Lancaster, Pa, 11-20.
Clyne, T.W., Withers, P.J. (1993).
“An Introduction to Metal Matrix Composites.”
Cambridge University Press.
Coleman, S.L., McEnaney, B. et al. (1992).
“Corrosion Behaviour of Metal Matrix Composites.”
5th European Conference on Composite Materials, 4-10 April, Bordeaux, France.
Ed. A.R. Bunsell, J.F. Jamet, A. Massiah, 493-498.
Coleman, S.L., Scott, V. D. et al. (1994).
“Corrosion Behaviour of Aluminium-Based Metal Matrix Composites.”
Journal of Materials Science, 29, 2826-2834.
Czyrklis, W.F. (1985).
“Corrosion evaluation of graphite-aluminium and graphite-magnesium metal matrix composites”
Corrosion 85, National Association of Corrosion Engineers, Paper n°196.
Dash, L. C. (1988).
“The mechanism of corrosion and corrosion control of aluminium/graphite metal matrix composites.”
Thèse, Ohio State University.
Davis, G.D., Moshier, W.C., Fritz, T.L. et al. (1990).
“Evolution of the chemistry of passive films of sputter-deposited, supersaturated aluminium alloys.”
J. Electrochem. Soc., 137, 422-427.
Deltombe, E., Pourbaix, M. (1955).
“Comportement électrochimique de l'aluminium. Diagramme d'équilibre E-pH du système Al- H2O à 25°C. ”
Rapport technique RT.42, Cebelcor.
Deltombe, E., Vanleugenhache, C. et al. (1974).
“Atlas of Electrochemical Equilibria in Aqueous Solutions.”
NACE,168-175.
Dexter, S.C. (1990)
“Marine corrosion, Sea water.”
Metals Handbook, 9th ed., Vol. 13 – Corrosion, p.893.
American Society for Metals, Metals Park, Ohio.
Doig, P. and P. E. J. Flewitt (1979).
“A Finite Difference Numerical Analysis of Galvanic Corrosion for Semi-Infinite Linear Coplanar Electrodes.”
Journal of Electrochemical Society,126, 12, 2057-2063.
Dorlot, J.M., Baïlon, J.P., Masounave, J. (1986).
Des Matériaux.
Ed. EEPM.
Dull, D. L., Harrigan, W. C. Jr, et al. (1975).
“The Corrosion of 6061 Aluminum Alloy-Thornel 50 Graphite Composite in Distilled Water and NaCl Solution.”
AD-A011 761, National technical Information Service, Springfield, VA, 1-20.
Dull, D. L., Harrigan, W. C. Jr, et al. (1977a).
“The effect of matrix and fiber composition on mechanical strength and corrosion behavior of graphite-aluminium composites.”
The Aerospace Corporation, El Segundo, CA 90245, Aerospace Report n°ATR-76(7564)-1.
Dull, D. L., Harrigan, W. C. Jr, et al. (1977b).
“Final Report: the effect of matrix and fiber composition on mechanical strength and corrosion behavior of graphite-aluminum composites.”
The Aerospace Corporation, El Segundo, CA 90245.
Dutta, I., Elkin, L.R., King, J.D. (1991).
“Corrosion Behavior of a P130x Graphite Fiber Reinforced 6063 Aluminum Composite Laminate in Aqueous Environment.”
J. Electrochem. Soc., 138, 11, 3199-3208.
Edeleanu, C., Evans, U.R. (1951).
“The causes of the localized character of corrosion on aluminium.”
Trans. Faraday Soc., 47, 1121-1135.
Ehrburger, P. (1989).
“Surface Properties of Carbon Fibres.”
Carbon Fibres, Filaments and Composites,147-161.
Ehrburger, P. (1990).
“Surface Properties of Carbon Fibres.”
Carbon Fibers, Filaments and Composites.
Eds J.L.Figueiredo et al., 147-161.
Evans, J. M., Braddick, D. M. (1971).
“Corrosion Behaviour of Fibre-Reinforced Al Composites.”
Corrosion Science, 11, 611-614.
Frayret, J.P. (1979).
“Etude électrochimique de l’activation et de la passivation du titane dans HCl et dans les solutions mixte (HCl-NaCl).”
Thèse. Nantes
Friend, C., Naish, C. et al. (1990).
“The corrosion characteristics of a model C/Al metal matrix composite.”
4th European Conference on Composite Materials.
Ed. J. Fueller, 307-312.
Fu, J. W. (1982).
“Technical Note: A Finite Element Analysis of Corrosion Cells.”
Corrosion, 38, 5, 295-296.
Gimenez, P., Rameau, J. J. et al. (1981).
“Experimental pH Potential Diagram of Aluminum for Sea Water.”
Corrosion, 37, 12, 673-682.
Godard, H.P. (1951).
“A new instrument for measuring galvanic corrosion currents.”
Corrosion, 7, 93.
Greene, N. D., Ahmed, N. J. (1997).
“Corrosion Protection of Aluminum Metal-Matrix.”
Corrosion, 53, 12, 920-927.
Gugler, G., Neuvecelle, J. D. et al. (1994).
“In Situ AFM Investigation of Pitting.”
Eur. Fed. Corros. Publ., 12, 274-279.
Guigon, M., Oberlin, A. et al. (1984).
“Microtexture and Structure of Some High-Modulus, PAN-Base Carbon Fibres.”
Fibre Science and Technology, 20, 177-198.
Guigon, M. (1991).
“Microtexture and Mechanical Properties of Carbon Fibers: Relationship With the Fiber- Matrix Adhesion in a Carbon-Epoxy Composite.”
Polymer Engineering and Science, 31, 17, 1264-1270.
Hack, H.P., Taylor, D. (1990).
“Evaluation of Galvanic Corrosion.”
Metals Handbook, 9th ed., Vol. 13 – Corrosion, 234-238.
American Society for Metals, Metals Park, Ohio.
Heidersbach, R.H. (1990).
“Cathodic Protection.”
Metals Handbook, 9th ed., Vol. 13 – Corrosion, p.466.
American Society for Metals, Metals Park, Ohio.
Hihara, L. H. (1989).
“Corrosion of aluminium-matrix composites.”
Thèse, MIT, Cambridge, CA.
Hihara, L. H., R. M. Latanision (1991).
“Localized Corrosion Induced in Graphite/Aluminum Metal-Matrix Composites by Residual Microstructural Chloride.”
Corrosion, 47, 5, 335-340.
Hihara, L. H., R. M. Latanision (1992).
“Galvanic Corrosion of Aluminum-Matrix Composites.”
Corrosion, 48, 7, 546-552.
Hihara, L. H., R. M. Latanision (1993).
“Supressing Galvanic Corrosion in Graphite/Aluminum Metal-Matrix Composites.”
Corrosion Science, 34, 4, 655-665.
Hihara, L. H., R. M. Latanision (1994).
“Corrosion of Metal-Matrix Composites.”
International Materials Reviews, 39, 6, 245-264.
Hihara, L. H. (1997).
“Corrosion of Aluminum-Matrix Composites.”
Corrosion Reviews, 15, 3-4, 361-386.
Hinton, B.R.W., Arnott, D.R., Ryan, N.E. (1986).
“Cerium conversion coatings for the corrosion protection of aluminum”
Mater. Forum, 9, 3, 162-173.
Ho, C. T. (1995).
“Nickel-coated carbon fiber-reinforced tin-lead alloy composites.”
Journal of Material Research, 10, 7, 1730-1735.
Hollingsworth, E.H., Hunsicker, H.Y. (1990).
“Corrosion of Aluminum and Aluminum Alloys”
Metals Handbook, 9th ed., Vol. 13 – Corrosion, p.583.
American Society for Metals, Metals Park, Ohio.
Honjo, K., Shindo, A. (1986a).
“Interfacial Behavior of Aluminum Matrix Composites Reinforced with Ceramics-Coated Fibers.”
1st International Conference on Composite Interfaces, 27-30 May, Cleveland, Ohio, U.S.A.
Ed. H. Ishida, J.L. Koenig, 101-107.
Honjo, K., Shindo, A. (1986b).
“Influence of carbide formation on the strength of carbon fibres on which silicon and titanium have been deposited.”
Journal of Materials Science, 21, 2043-2048.
Johnston, W. D., Greenfield I. G. (1991).
“Evaluation of techniques for interface modification in aluminum-matrix composites”
8th International Conference on Composite Materials, Honolulu.
Ed. S.W. Tsai, Springer, G.S., Vol. 2, 19E, 1-12.