Coefficient of friction
EFFECTS OF TIN ON HARDNESS, WEAR RATE AND COEFFICIENT OF FRICTION OF CAST CU-NI-SN ALLOYS
... effects of Sn on hardness, wear rate and the coefficient of friction of spinodal Cu-Ni-Sn ...Alloys of appropriate compositions were melted in a crucible furnace under argon ...
10
Influence of the Previous Preheating Temperature on the Static Coefficient of Friction with Lubrication
... condition of the contact surface is of great interest and importance in many applications including fluid ...influence of different contact surfaces on the value of the coefficient ...
5
Captação do coeficiente de atrito pneu/solo para veículos do tipo baja / Captation tire/road coefficient of friction for vehicle tipe baja
... virtue of the students perform all calculations and captures for dimensioning the ...capture of the coefficient, also related to the brake sector, since its value interferes with dynamic ...One ...
8
MULTIPLE FACTOR ANALYSIS OF DYNAMIC FRICTION COEFFICIENT OF FRICTION UNITS IN TRIBOSYSTEM AND TRIBOUNITS UNDER LABORATORY CONDITIONS
... analysis of the dynamic friction coefficient of the friction units in tribosystem and tribounits under laboratory ...parameters of the control handle tension of the brake ...
17
The Wear Characteristics of Heat Treated Manganese Phosphate Coating Applied to AlSi D2 Steel with Oil Lubricant
... quality of the product and increase the production rate. The advantages of Manganese Phosphate coating include high corrosion resistance, oil retaining capacity, hardness, excellent lubricity, high chemical ...
8
Effects of Moving Side Walls on Confined Granular Packings
... influence of side walls movement of a granular column is investigated by discrete element, molecular dynamics ...evolution of stress profile and deflection of vertical stresses is due to ...
6
Investigation on Friction and Wear Properties of High-Temperature Bearing Steel 9Cr18Mo
... variation of the friction coefficient of 9Cr18Mo with different secondary frictional ...The friction coefficient curves for 9Cr18Mo-ceramic and 9Cr18Mo-GCr15 grow over ...the ...
8
J. Braz. Soc. Mech. Sci. & Eng. vol.30 número2
... results of the experiments conducted toward identifying the optimum level setting for the manufacturing parameters within the experimental ...specimens of the brake pad were made. Their surface hardness, ...
8
Development of Abrasive Selection Model/Chart for Palm Frond Broom Peeling Machine Design
... surfaces of its rolling and stationary ...dust of the leaf blade rubbed off is removed from the peeling slit using a blower connected to the perforated roller of the peeling ...action of this ...
7
Effective engineering properties in the design of storage structures of postharvest dry bean grain
... processing of dried dry bean there is a need to know various physical and mechanical properties as a function of moisture content (TAVAKOLI et ...properties of dry bean grains are to be known for the ...
12
Polímeros vol.25 número5
... mass of the specimens was measured before and after the friction test, and wear rates were calculated as a mean value of the weight reduction in the three ...coefficients of friction ...
7
HYDRAULIC PERFORMANCE OF DRIPPERS APPLYING SANITARY LANDFILL LEACHATE DILUTED IN WATER
... development of grasses on the landfill surface, however, the clogging of emitters of the irrigation systems is the major obstacle for this ...objective of this study was to select empirical ...
10
Rev. Bras. Anestesiol. vol.59 número5 en v59n5a03
... results of both lungs were expressed descriptively. Since the weight of the patients varied the data on the volumes of pulmonary air and tissue and the weight of pulmonary compartments ...
8
Using Four Model for Predicting the Thermal Conductivity in the Analysis of the Efficacy of Nanofluid in a Double-Tube Heat Exchanger
... characteristics of a coolant liquid had been in research for ...capabilities of these fluids, the use of nonosized metals and metal oxides as an additive suspended into the base fluid is a technique ...
10
Matéria (Rio J.) vol.12 número4
... density of 30mA/cm 2 ...Cross-sections of the coatings were inspected by scanning electron microscopy (SEM) in order to evaluate coating thickness uniformity and ...
6
Determination of Turbulence Coefficient using Genetic Algorithms
... framework of GA for determination of optimal values of well hydraulic parameters with special attention to turbulence loss ...principles of GA, the objective function, sse is minimized and ...
8
COMPUTER AIDED DESIGN OF A MACHINE TOOL AND DEVELOPING 3-D MODEL
... property of the screw is lost when the lead is ...number of starts. For double-start thread, lead is twice of the pitch and for triple threaded screw, three times of ...
9
Control of Precision Grip Force in Lifting and Holding of Low-Mass Objects.
... presence of signal-dependent noise (SDN) in motor commands, ...magnitude of motor command ...cost of SDN on task performance. The presence of SDN predicts that fluctuations in grip force ...
19
Polímeros vol.25 número3
... ton of boron wastes are generated each ...% of boron wastes and determined their pin-on-disk dynamic friction, wear, Shore D hardness and surface ...Dynamic friction increases with increasing ...
6
Slope coefficient R2 Genotype
... rate of controlled seed is very low (around 20 % in Santa Catarina), since farmers mostly use seeds from their own production (Herbes et ...means of bacteria dissemination, especially over long ...
6