Tribological Performance Optimization of Electroless Ni-P-W Coating Using Weighted Principal Component Analysis

In as-plated condition, the microhardness values of the Ni-B-P alloy coatings increases with increasing borohydride concentration in the plating bath due to the corresponding

The Effect of Electroless Bath Parameters and Heat Treatment on the Properties of Ni-P and Ni-P-Cu Composite Coatings.. Seyyed Hashem Mousavi Anijdan a , Masoud Sabzi b *,

Medium optimization by response surface methodology for poly Y glutamic acid production using dairy manure as the basis of a solid substrate. Protease and

This can means that the interaction of compressive residual stresses contained in the intermediate layer of electroless nickel with one contained at the surface of the base mate-

The AlCrN coating promoted, compared to the uncoated insert, an increase on the hardness of the surface cutting tool, a better tribological behavior and consequently a

Changing the P content, Pd-P electroless alloys display different crystalline/amorphous character and thus the investigation of their electrocatalytic activity in a potential

A nickel-loaded activated carbon (Ni/AC) composite particle electrode was prepared by electroless deposition with palladium-free pretreatment to improve the

In-line monitoring of titanium dioxide content in poly(ethylene terephthalate) extrusion. Polymer Engineering and Science, v. Online light scattering measurements: a method to