Texto
DOI: http://dx.doi.org/10.1590/1516-1439.306514er
Materials Research. 2016; 19(4): 963 © 2016
In the article “Plasma Carburizing of Sintered Pure Iron at Low Temperature”, DOI number: <http://dx.doi. org/10.1590/1516-1439.306514>, published in Mater. Res., March-April 2015, 18(2): 320-327, in page 320 where the author’s names were:
“Thiago de Souza Lamim, Euclides Alexandre Benardelli, Cristiano Binder, Aloisio Nelmo Klein, Ana Maria Maliska”
It should be written:
Documentos relacionados
Mixed manganese/copper ferrites having high Curie temperatures and magnetization depending on the composition form an important class of magnetic materials used in many
These characteristics led to high speciic surface, high molybdenum adsorption capacity but low chemical stability, making the material inappropriate for use in 99 Mo/ 99m
Figure 2: Experimental cooling curves obtained for diferent positions along the length of the DS cast iron castings: (a) G1: bottom part of the mold in graphite; ΔT~40K; (b)
Microstructure and Properties of Coating of FeAlCuCrCoMn High Entropy Alloy Deposited by Direct Current Magnetron Sputtering.. Xiaochun Li a , Zuoyun Zheng b , Dan Dou b , Jianchen
thermal changes by TGA, which evidenced weight loss between 100 and 500°C that was attributed to the removal of residual ethylene oxide, so this technique, at a 10°C∙min -1
The variations of the dielectric constant, the dielectric loss, and AC conductivity with variation in frequency and temperature for YSZ nanoparticles were analyzed. The
The test result shows that the specimen joint with 10µ Zn interlayer has higher mechanical properties than samples made with 5µ, 10µ, 20µ, 40µ and 100µ Zn interlayer.. To analyze
was based on analyses of difuse relectance and colorimetric coordinates and focused in the energy levels of the Pr 3+ ions.. It should be emphasized that no publication was found in
