Effect of Sulfonation of SEBS Copolymer on the physicochemical properties of Proton Exchange Membrane

Synthesis and characterization of epoxy- based semi-interpenetrating polymer networks sulfonated polyimides proton-exchange membranes for direct methanol fuel cell

One drawback of DMFCs is the so-called crossover effect, through which methanol leaves the anodic compartment and crosses the proton exchange membrane (PEM), thereby promoting

Basing on the results of MANOVA test it has been observed that the strongest significant effect on an increase of the tensile strength R m exerted the addition of Mg, followed by

social assistance. The protection of jobs within some enterprises, cooperatives, forms of economical associations, constitute an efficient social policy, totally different from

Abstract: As in ancient architecture of Greece and Rome there was an interconnection between picturesque and monumental forms of arts, in antique period in the architecture

Studies aiming at improving the activity and stability of dispersed W and Mo containing Pt catalysts for the CO tolerance in proton exchange membrane fuel cell (PEMFC) anodes

Therefore, in principle, the decrease of the cell performance along the electrode cycling can be a consequence of all these phenomena, that is: the loss of Mo-species of the

SEBS stripes and droplets adhered to the mica surface after the complete evapora- tion of the solvent, and inside each stripe or droplet the phase separation is such that