• Nenhum resultado encontrado

Influence of vibrations during crystallization on mechanical properties and porosity of AlSi13Cu2 alloy

N/A
N/A
Protected

Academic year: 2017

Share "Influence of vibrations during crystallization on mechanical properties and porosity of AlSi13Cu2 alloy"

Copied!
4
0
0

Texto

Loading

Imagem

Fig. 1. Batch of poured specimens
Fig. 3. Positioning of the metal mould during pouring
Table 3. Results of strength tests of the AlSi13Cu2 alloy

Referências

Documentos relacionados

We also determined the critical strain rate (CSR), understood as the tangent of the inclination angle between the tangent to the crack development curve and the crack development

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

nonlinear vibrations of cylindrical shells, the present work investigates the influence of small uncertainties in the physical and geometrical parameters of the shell

Basing on the results of MANOVA test it has been observed that the strongest significant effect on an increase of the tensile strength R m exerted the addition of Mg, followed by

The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of

social assistance. The protection of jobs within some enterprises, cooperatives, forms of economical associations, constitute an efficient social policy, totally different from

Abstract: As in ancient architecture of Greece and Rome there was an interconnection between picturesque and monumental forms of arts, in antique period in the architecture

[r]