• Nenhum resultado encontrado

Mat. Res. vol.5 número3

N/A
N/A
Protected

Academic year: 2018

Share "Mat. Res. vol.5 número3"

Copied!
6
0
0

Texto

Imagem

Table 1. Volumetric percentage of gross grains of the annealed samples at 1090 and 1130 °C for various periods of time and  dif-ferent start conditions (solution treated or aged at difdif-ferent  tem-peratures for 1000 h).
Figure 1. Evolution of the volumetric fraction of gross grains as a function of the annealing temperature and time for different start conditions
Figure 2. Curves showing the maximum radii of a) M 23 C 6  parti- parti-cles and b) (Ti 0,92 Mo 0,08 )C particles, dissolved at time t, for various temperatures.
Table 2. Solution times (in seconds) calculated for M 23 C 6  and (Ti 0.92 Mo 0.08 )C particles by using Aaron e Kotler’s model

Referências

Documentos relacionados

To the effect of crystalline transition within a certain temperature range take place at Af tem- perature (final austenitic), representing the highest level of occurrence of

Within the limitations of this in vitro study, the following conclusions may be drawn: the applica- tion of a self-etch adhesive system on CHX-treated sound dentin or

Within the limitations of this in vitro study, the following conclusions may be drawn: the applica- tion of a self-etch adhesive system on CHX-treated sound dentin or

Based on the experimental design of this study, the following conclusions can be drawn: grinding with and without cooling increased the flexural fatigue limit of the

Within the limitations of this in vitro study, the following conclusions can be drawn: 1) The amount of light transmitted from the HP-3M-ESPE through the protective filters

In this work, the effect of storage temperature of inulin concentrated solution as well as temperature on the rheological behavior of liquid and precipitated phases obtained from

In the study of grain size as a function of calcination temperature, the sample powders produced by solvothermal reaction for 72h at 100 ºC were heated in the temperature range

Within the limitations of this study, the following conclusions can be drawn: 1) The glass fiber post showed better stress distribution when compared with other retainers; 2)