Science Arts & Métiers (SAM)

Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase Mariette Moevus•Yves Jorand •Christian Olagnon• Sandrine Maximilien•

Effect of electro discharge machining EDM on the AISI316L SS white layer microstructure and corrosion resistance Habib Sidhom&Farhat Ghanem&Tidiane Amadou& Gonzalo Gonzalez&Chedly

Thus, this harmonic, if exploited, can increase significantly the torque density of the machine[5].The main drawback of such configuration is the magnetomotive force MMF spectrum which

In the present work, the mass gain kinetics increases with strain-hardening of tensile samples, which can be attributed to a faster precipitation of MoN and Mo2N nitrides at the

Hardness-load modelling To predict the hardness variation as a function of the applied load, or in the same way as a function of the indenter displacement, the application of the model

It can also be seen that the higher fatigue strength of the 45°-B1 batch compared to the 90° batch is not in agreement with the pore size distributions measured on polished samples of

Figure 19.Fractured surfaces of the samples: a after the quasistatic tensile test, b after the loading at 1 s−1, and c after the high strain rate tensile tests 100 s−1... Mechanics of

As for FE_45 specimens, the crack density increase depending on tensile strain was found linear until specimen failure, because +45° and 45° layers have the same behaviour and composite