Science Arts & Métiers (SAM)

Formalization: Given x, y and z, the three vectors containing the components of the 3D coordinates of the Nn nodes of the bar network coupled to the control vertices of the meshes a

& The slug temperature should be optimised in order to: allow the increase of the material desagglomeration and thus decreases the thixoforging load avoid the collapse of the slug

Hyperbola method, PDF contour of the estimated locations for the impact of size 20mm and the actual damage location white cross.. The performance quantification is done thanks to the

In addition, the tensile stresses applied on the shot-sleeve inner surface during the cooling phase combined with the erosion phenomenon caused by the molten brass fall in the second

Hardness-load modelling To predict the hardness variation as a function of the applied load, or in the same way as a function of the indenter displacement, the application of the model

The displacement represents the distance measured by DIC between two points located on the compression diagonal at 45◦to the rails passing through the centre of the shear area

The proposed proce- dure AK-ILS takes advantage of several points of the literature review: •the Hammersley sequence for the initial design of experiments, •the Kriging metamodel

Crack delamination appears at inclined drilling in the TBC at the BC/TBC interface at the leading edge but only from the second laser pulse when the laser beam interacts with the