Science Arts & Métiers (SAM)

CRITERE DE SECONDE VARIATION D’ENERGIE Nous avons montré que la stabilité de la réponse quasi- statique d’un solide dissipatif standard élasto-plastique ou visco-plastique est assurée

In this paper, the term “EP” would imply the illusion of presence experience the sense of pres- ence, while the term “presence” would be reserved for experience of presence in its

The analytic tool pre- sented in this study utilizes an in-process sensing technol- ogy combined with HSC recordings, which allows a syn- chronized analysis of the HSC recordings with

Results and discussion Figure 1: Ranking of the situations based on peak values of right and left handrim total force during propulsion Results based on total force are presented on

& The slug temperature should be optimised in order to: allow the increase of the material desagglomeration and thus decreases the thixoforging load avoid the collapse of the slug

To conclude, ATBC increases efficiently the elongation at break of PLA while maintaining the permeability coefficient of helium and keeping the barrier properties against oxygen and

For all of these reasons, a Q4P1 shape function based on global DIC approach has been chosen for the present study, concerning the displacement field measurement during orthogonal

This can be explained by the fact that the sputtering rate of Al is higher than the Mo one.[10]Finally, as observed in the case of the Cr,AlN coatings and for the same reason, we