Science Arts & Métiers (SAM)

For instance, the shape of the force maps as a function of the size parameter D/λ and the space coordinates remains the same for plane standing waves and it is very similar in the case

The significant increase of the compressive stress and the changes in the mechanical properties hardness and elastic modulus observed at 50% nitrogen concentration in the plasma may be

This can be explained by the fact that the sputtering rate of Al is higher than the Mo one.[10]Finally, as observed in the case of the Cr,AlN coatings and for the same reason, we

Hyperbola method, PDF contour of the estimated locations for the impact of size 20mm and the actual damage location white cross.. The performance quantification is done thanks to the

On the basis of these estimated models, three amplitude dependent damage indexes are built: one that monitors the shift of the resonance frequency of the structure, another the ratio of

Interpretations The different previous results show that the reuse of IN718 powder after the proposed recycling treatment does not modify significantly: 1 the characteristics of the

Hardness-load modelling To predict the hardness variation as a function of the applied load, or in the same way as a function of the indenter displacement, the application of the model

The presence of this weakly varying flow structure, living on the edge of turbulence, suggests the existence of a relative cha- otic attractor embedded in the edge, like in the case of