Science Arts & Métiers (SAM)

The optimisation is performed with NSGA-II algorithm which may choose technical parameters blade length, transmission ratio or electro-mechanical coefficient in this example to maximise

Manual assembly line developed at the Arts et Métiers Campus in Lille, with educational and industrial transfer objectives Taking up various concepts detailed in this chapter,

Keywords: Inspirational process, Case study, Conjoint Trends Analysis, CTA method 1 INTRODUCTION This paper describes a research project to model the cognitive processes of designers

This is why the co-design phase - including the conceptual, ar- chitectural and detailed design - should allow adding some constraints of appreciation: - Physical textures,

Collettea, Francette Thominettea, Sylvie Escribanob, Angèle Ravacholb, Arnaud Morinb, Gérard Gebelc,∗ aLaboratoire d’Ingénierie des Matériaux, ENSAM, 151 Boulevard de l’Hôpital, 75013

Thus, this harmonic, if exploited, can increase significantly the torque density of the machine[5].The main drawback of such configuration is the magnetomotive force MMF spectrum which

Optical transmittance spectra versus wavelength in the visible region of GLAD titanium thin films deposited on glass substrates with an incidence angle a = 85° and after the annealing

Technol.201, 4329–4333 2006 Ding, X., Zeng, X.: Structural, mechanical and tribological properties of CrAlN coatings deposited by reactive unbalanced magnetron