Science Arts & Métiers (SAM)

This is an author-deposited version published in: http://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/7761 To cite this version : Nicolas PERRY, Jean-Christophe WAHL,

Using a few preliminary cutting operations in various conditions, machined surfaces are measured and the effects of feed rate, depth of cut, cut- ting speed and insert nose radius are

Collettea, Francette Thominettea, Sylvie Escribanob, Angèle Ravacholb, Arnaud Morinb, Gérard Gebelc,∗ aLaboratoire d’Ingénierie des Matériaux, ENSAM, 151 Boulevard de l’Hôpital, 75013

Optical transmittance spectra versus wavelength in the visible region of GLAD titanium thin films deposited on glass substrates with an incidence angle a = 85° and after the annealing

Technol.201, 4329–4333 2006 Ding, X., Zeng, X.: Structural, mechanical and tribological properties of CrAlN coatings deposited by reactive unbalanced magnetron

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/20916 To cite this version : Julie DAVOT, Marie THOMAS-POHL, Coralie

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/18658 To cite this version : Marianne PROT, Guillaume DUBOIS, Trevor

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/10536 To cite this version : Tudor BALAN, Xavier LEMOINE, Eric MAIRE,