Glass ionomer cements
Water sorption and solubility of glass ionomer cements indicated for atraumatic restorative treatment considering the time and the pH of the storage solution
... studied glass ionomer cements were not influenced by the various storage solutions; b) the highest water sorption rate, for all the materials, occurred in the first twenty-four hours after immersion, ...
6
INTERACTION OF FLUORIDE COMPLEXES DERIVED FROM GLASS-IONOMER CEMENTS WITH HYDROXYAPATITE
... grade glass-ionomer cements were employed, namely Fuji IX (capsulated, GC, Japan) and ChemFlex (Dentsply, ...a glass block by spatulation of the components in the ratio of ...between ...
5
Comparação de três sistemas digitais em relação à densidade óptica de cimentos de ionômetro de vidro = Comparison of three digital systems in relation to the optical density of glass ionomer cements
... The aim of this study was to compare three digital systems – two optical plates and a sensor – in relation to the optic density of three restoring glass ionomer cements. The samples confectioned with ...
5
Surface roughness of glass ionomer cements indicated for atraumatic restorative treatment (ART)
... of glass ionomer resto- rations are particularly important because rough sur- faces might be prone to faster bacterial colonization and maturation of plaque, thus increasing caries risk ...four glass ...
4
Effect of ultrasonic ecxitation on the ultimate tensili strength of glass ionomer cements after different water storage times
... on glass ionomer cements surface accelerated initial setting reaction and improved the mechanical ...of glass ionomer cements ater ultrasonic excitation and diferent water ...
5
Avaliação in vitro da resistência ao cisalhamento e liberação de flúor de dois cimentos de ionômero de vidro reforçado por resina = In vitro evaluation of shear bond strength and fluoride release from two resin-reinforced glass ionomer cements
... resin-reinforced glass ionomer cements, Fuji Ortho LC and Fuji Ortho Band (GC América Corporation, Tokyo, Japan) in terms of shear bond strength and fluoride ...
6
Biological compatibility of some types of endodontic calcium hydroxide and glass ionomer cements
... Cement implants placed in the subcutaneous tissue of animals evaluate the in vivo compatibility of materials to be used in extended contact with the connective tissues. The results of this method can be used as a ...
7
Rev. odontol. UNESP vol.46 número4
... A plastic microtube (1.0 mm internal diameter and 2.0 mm high) (Tygon, Norton Performance Plastic Co, Cleveland, OH, USA) was itted with the internal area coinciding with the area bounded by the adhesive tape and was ...
6
J. Appl. Oral Sci. vol.15 número3
... different glass ionomer cements (GICs) used for sandwich restorations and to assess the effect of acid etching of GIC on microleakage at GIC-resin composite ...
5
J. Appl. Oral Sci. vol.13 número1
... different glass-ionomer cements: a high-density (Ketac Molar - ESPE) and a resin-modified cement (Fuji VIII – GC) using the Atraumatic Restorative Treatment technique to restore multisurface cavities ...
5
Braz. oral res. vol.21 número3
... Dental Glass Ionomer Cement, ...resin-modiied glass ionomer cement obtained the best results, ir- respective of specimen ...both glass ionomer materials, the 12 mm x 6 mm matrix ...
5
Mat. Res. vol.11 número1
... The aim of this study was to assess the influence of ultrasonic wave propagation on the compressive (CS) and diametral tensile (DTS) strengths of glass ionomer cements (GICs). Three variables were ...
6
J. Appl. Oral Sci. vol.14 número especial
... Apart from the above arguments, amalgam holds another serious problem. Because of its brittleness the restoration should be as bulky as possible, and by absence of adhesion, cavity preparation is based on ...
7
Braz. Dent. J. vol.16 número1
... different glass ionomer ...conventional glass ionomer cement (Ketac-Fil); groups II and III, resin- modified glass ionomer cements (Vitremer R and Fuji II LC, ...
4
J. Appl. Oral Sci. vol.13 número3
... There was no significant difference in the degree of marginal microleakage between the conventional and resin- modified glass ionomer cements (Figures 3B and 2B), and also between luting ...
6
Mat. Res. vol.5 número4
... resin-modified glass ionomer cements - Vitremer (M1) and Fuji II LC (M2) - and three ...a glass plate under a weight of 1000 g for 1 min, with a uniform flow of the ...
5
Mat. Res. vol.6 número1
... resin-modified glass ionomer cements Vitremer (3M Dental Products, St Paul, MN 55144) and Fuji II LC (GC Corporation, Tokyo, Japan); two polyacid-modified composite resins Freedom (Southern Dental ...
6
J. Appl. Oral Sci. vol.11 número2
... Except for ProTec Cem, all materials showed an increase in DTS between 1 hour and 1 week and between 1 day and 1 week. This increase can be explained by the setting reaction of glass ionomer cements. ...
6
Pesqui. Odontol. Bras. vol.15 número3
... Secondary caries are a worldwide public and socioeconomic problem. The placement of restorations can lead to the de- velopment of environmental conditions favorable to microbial colonization, especially on the ...
5
RGO, Rev. Gaúch. Odontol. vol.63 número4
... two glass ionomer cements (Ketac™ Molar and Photac™ Fil) and a microhybrid composite (Filtek™ z250), after being subjected to the action of different drinks commonly ingested by children and ...
6