• Nenhum resultado encontrado

Modeling and optimization

Modeling and Optimization of Extracellular Polysaccharides Production by Enterobacter A47

Modeling and Optimization of Extracellular Polysaccharides Production by Enterobacter A47

... agar) and crustacean ...pullulan and bacterial alginate) representing only a small fraction (Freitas et ...rates and being more amenable to manipulation of growing/production ...implementation ...

154

SURROGATE MODELING TECHNIQUES AND HEURISTIC OPTIMIZATION METHODS APPLIED TO DESIGN AND IDENTIFICATION PROBLEMS

SURROGATE MODELING TECHNIQUES AND HEURISTIC OPTIMIZATION METHODS APPLIED TO DESIGN AND IDENTIFICATION PROBLEMS

... surrogate modeling (discussed in Chapter II) are ...the optimization are defined. Other than parameters of the optimization method (such as population size, number of iterations, ...heuristic ...

89

Modeling, Control and Optimization of a New Swimming Microrobot Design

Modeling, Control and Optimization of a New Swimming Microrobot Design

... performance modeling, optimization and control of a new swimming Microrobot Design have been ...velocity and the total thrust force. The thrust force, the velocity and microrobot ...

7

A Modeling Method for Router-Level  Topologies based on Network-Cost  Optimization

A Modeling Method for Router-Level Topologies based on Network-Cost Optimization

... a modeling method where topologies are generated based on network-cost ...our modeling method, important topology-related metrics such as clustering coe_cients and the number of node pairs passing ...

15

Modeling and Optimization of Precedence-Constrained Production Sequencing and Scheduling Using Multi-Objective Genetic Algorithms

Modeling and Optimization of Precedence-Constrained Production Sequencing and Scheduling Using Multi-Objective Genetic Algorithms

... scheduling, and networking ...requirement and a deadline. In addition, the labour, material and working capital of the company available for production are ...time and each hour of running ...

6

Densification and volumetric change during supersolidus liquid phase sintering of prealloyed brass Cu28Zn powder: Modeling and optimization

Densification and volumetric change during supersolidus liquid phase sintering of prealloyed brass Cu28Zn powder: Modeling and optimization

... methodology and central composite rotatable design for modeling and optimizing the effect of sintering variables on densification of prealloyed Cu28Zn brass powder during supersolidus liquid phase ...

13

MODELING AND OPTIMIZATION OF REMOVAL OF CEFALEXIN FROM AQUATIC SOLUTIONS BY ENZYMATIC OXIDATION USING EXPERIMENTAL DESIGN

MODELING AND OPTIMIZATION OF REMOVAL OF CEFALEXIN FROM AQUATIC SOLUTIONS BY ENZYMATIC OXIDATION USING EXPERIMENTAL DESIGN

... increasing and decreasing pH away from this value, oxidation and cefalexin removal ...concentration and CEX concentration were determined as 5, 45 ˚C, 1.75 U/mL, 1mM, and 10 mg/L, ...results ...

14

Modeling and Analyzing Wavelet based Watermarking System using Game Theoretic Optimization Technique

Modeling and Analyzing Wavelet based Watermarking System using Game Theoretic Optimization Technique

... applied and implemented, in the engineering field, for the resolution of the conflicting behaviors of the ...encoder and the attacker rationally choose their strategies in order to maximize and ...

6

Optimization of the Building Energy Performance through Dynamic Modeling, Systems Simulation, Field Monitoring and Evaluation of Renewable Energy Applications

Optimization of the Building Energy Performance through Dynamic Modeling, Systems Simulation, Field Monitoring and Evaluation of Renewable Energy Applications

... residential and commercial sectors, in India is rising consistently at about 8% and the overall energy consumption in buildings has seen an increase from a low of 14% in the 1970s to nearly 33% in ...the ...

8

Aplicação do método da continuação homotópica na plataforma EMSO / Environment for modeling, simulation and optimization

Aplicação do método da continuação homotópica na plataforma EMSO / Environment for modeling, simulation and optimization

... Por fim, a aplicação do método da continuação Homotópica na modelagem de uma coluna de destilação extrativa para separar etanol-água, utilizando o simulador EMSO, mostrou se[r] ...

6

UNDERWATER ACOUSTIC CHANNEL MODELING PROPOSAL FOR SHALLOW WATER COMMUNICATION LINK OPTIMIZATION

UNDERWATER ACOUSTIC CHANNEL MODELING PROPOSAL FOR SHALLOW WATER COMMUNICATION LINK OPTIMIZATION

... runs and then obtain rules of sound propagation empirically merely by subjecting the data amassed to and unprejudiced statistical ...surface, and refraction conditions, and then to analyze the ...

14

EVOLUTION MODELING METHODS APPLICATION FOR CIRCULATION OF DOCUMENTS OPTIMIZATION AT THE ENTERPRISE

EVOLUTION MODELING METHODS APPLICATION FOR CIRCULATION OF DOCUMENTS OPTIMIZATION AT THE ENTERPRISE

... ȾɅə ɈɉɌɂɆɂɁȺɐɂɂ ȾɈɄɍɆȿɇɌɈɈȻɈɊɈɌȺ ɇȺ ɉɊȿȾɉɊɂəɌɂɂ. ɘ.[r] ...

6

Comparative study of Fault Tolerance techniques

Comparative study of Fault Tolerance techniques

... deadline and budget constraints for schedule optimizations and manages the supply and demand of resources in the Grid using a set of distributed computational economy and resource trading ...

6

Computer Οptimization of Geometric Form of Tool and Preform for Closed-die Forging of Compressor Blade Simulator

Computer Οptimization of Geometric Form of Tool and Preform for Closed-die Forging of Compressor Blade Simulator

... the optimization stages is to determine the geometric shape of the preform produced by ...the modeling software module to simulate the final forging operation without notches and metal ...preform ...

3

Modeling and Analysis of Queuing Systems in Banks A case study of Ghana Commercial Bank Ltd. Kumasi Main Branch

Modeling and Analysis of Queuing Systems in Banks A case study of Ghana Commercial Bank Ltd. Kumasi Main Branch

... long and winding queues could result to prolonged discomfort and economic cost to them; however increasing the service rate will require additional number of tellers which implies extra cost to ...cost ...

4

Simulation and Optimization of a Quarterwave Transformer for a W- Band Reducedheight Type IMPATT Oscillator

Simulation and Optimization of a Quarterwave Transformer for a W- Band Reducedheight Type IMPATT Oscillator

... power and efficiency of these kinds of ...out modeling, simulation and optimization of a quarter-wave step transformer section for a W-band reduced height type IMPATT oscillator by using High ...

7

Pesqui. Oper.  vol.21 número1

Pesqui. Oper. vol.21 número1

... Empirical modeling is considered from the perspectives of a general scheme for the Strategy of Empirical Research and Optimization Process ...identification and optimization stages are ...

17

Cerâmica  vol.64 número369

Cerâmica vol.64 número369

... minerals and some accessory minerals, mainly quartz, cristobalite, mica, feldspars and other clay minerals such as ...using modeling, simulation and optimization of the variable average ...

7

J. Aerosp. Technol. Manag.  vol.9 número1

J. Aerosp. Technol. Manag. vol.9 número1

... all optimization tasks, the complexity of the problem is directly coupled to the parameterization of the ...robust and reliable, since there will not be a specialist manually entering new parameters ...

8

Modeling And Simulation For NVH Evaluation

Modeling And Simulation For NVH Evaluation

... on modeling and simulation is proposed for Noise, Vibration, and Harshness (NVH) analysis for Anti-Lock Brake Systems ...data and simulation results need to be ...on modeling and ...

5

Show all 10000 documents...

temas relacionados