Resin composites
Model resin composites incorporating ZnO-NP: activity against S. mutans and physicochemical properties characterization
... Although resin composites are widely used in the clinical practice, the development of recurrent caries at composite-tooth interface still remains as one of the principal shortcomings to be overcome in this ...
10
Bacterial viability and physical properties of antibacterially modified experimental dental resin composites.
... The goal of the present investigation was, based on the new concepts of the aforesaid literature [4,5], to examine the material properties (flexural strength, modulus, water sorption, solubility, surface roughness, ...
11
The effect of a bleaching agent on the pigment removal and the bond strength of bulk-fill resin composites: an in vitro study
... bulk-fill resin composites have been developed be applied in bulk placement up to 4 mm ...fill resin composites (BFRC) to dentin after the immersion in regular beverages and the application of ...
7
Color change using HSB color system of dental resin composites immersed in different common Amazon region beverages
... Sixty samples of each material were made using a rectangular acrylic mold, fabricated with four 8 mm wide and 2 mm deep central perforations, according to ISO 4049 (International Standard Organization, 2000). The mold ...
8
Mat. Res. vol.13 número3
... low-viscosity resin composites (Admira Flow™, Grandio Flow™/VOCO; Filtek Z350 Flow™/3M ESPE; Tetric Flow™/Ivoclar- Vivadent) was evaluated using a well-established conventional micro-hybrid composite as a ...
4
Braz. Dent. J. vol.26 número5
... Dentifrice abrasiveness and brushing time may increase color change (∆E) and surface roughness (∆Ra) of resin composites. This study aimed to evaluate the effect of mechanical brushing time of dentifrices ...
7
bor 31 BOR 2017vol310004
... aged resin composites to be repaired could promote removal of the supericial mass of degraded resin, producing greater surface ...aged resin composites, and silane has the ability to ...
7
Braz. Dent. J. vol.24 número4
... four resin cements (VL, NX and CP) despite the decreasing values of ...restorative resin composites (8,17), where the faster polymerization reaction caused by light activation did not allow for ...
4
Polímeros vol.16 número4
... Abstract: The mechanical properties of polyester/fiberglass composites were studied. The aim of this work was to evaluate the possibility of reusing the wastes taken from spray-up processing of Paraíba state ...
4
J. Appl. Oral Sci. vol.21 número6
... acid and carboxylic acid functional monomers used in most adhesive opaque resins and promoters are effective to bond resin composites to base metal |& adhesive metal primer, no s[r] ...
7
Braz. oral res. vol.18 número2
... Flowable resin composites gener- ally present mean filler particle distribution rang- ing from ...flowable resin composites, Silux Plus showed the second greatest mass loss, probably due to ...
6
Braz. Dent. J. vol.25 número6
... resin composites using the MTT assay on immortalized human keratinocytes cells. As a result of absence of normal distribution, the statistical analysis was performed using the nonparametric Kruskal-Wallis ...
5
J. Appl. Oral Sci. vol.19 número2
... Based on the results of the present study, the 7 color stability of direct and indirect resin composites would be different was partly rejected because the < ((W*(( * < &[r] ...
7
Braz. Dent. J. vol.14 número1
... This study evaluated the effect of surface finishing methods on the average surface roughness of resin composites. Seven composites and two polishing systems were used. One hundred and twenty-six ...
5
J. Appl. Oral Sci. vol.26
... experimental resin composites containing porous spherical illers exhibited signiicantly higher wear resistance compared with those containing non-porous spherical ...and resin matrix because of the ...
7
Braz. oral res. vol.22 número2
... different resin composites: one packable (Solitaire 2, Heraeus Kulzer), one microhybrid (Charisma, Heraeus Kulzer), one nanohybrid (Simile, Pentron) and one microilled (Duraill VS, Heraeus ...The ...
7
Mat. Res. vol.13 número1
... softer resin-rich layer of material and exposing the hardest ...of resin composites may be sufficient to allow favorable depth of cure for light penetration and performing the hardness ...
8
J. Aerosp. Technol. Manag. vol.9 número2
... epoxy resin composites loaded with C-based materials, such as granular graphite, fullerenes and carbon ibers (Micheli et ...ferrite composites doped with dielectric lossy material, such as Ba ...
10
Mat. Res. vol.19 número2
... ill resin composites, BBF and XB ...ill resin composites exhibited signiicantly lower VHN (almost the half) than highly viscous bulk ill resin composites in all depths ...
8
J. Appl. Oral Sci. vol.21 número3
... In recent years, published studies have shown that lactic, propionic and acetic acid increased the degradation of restorative resin composites and adhesive systems 25,26. Thus, consid[r] ...
7