Effect Of Process Parameters On Mechanical Properties Of Friction Stir.Welded Joint Of Two Similar &Dissimilar Al-Alloys
Texto
Documentos relacionados
The present work aims to investigate the effect of some mixing parameters on the mechanical, and dynamic- mechanical properties of NBR-organoclay nano-composites prepared by melt
The effects of Al 2 O 3 reinforcements on microstructure, corrosion and toughness properties of dissimilar aluminum alloys joint fabricated by friction stir welding (FSW)
Performed tests have shown that application of phosphorus in form of CuP10 and AlSr10 master alloy as an inoculant gives positive results in form of refinement of primary crystals
One poured specimens of the investigated alloy in the following conditions: without vibrations, with 50%ampliture of the vibrations (0,4 mm), with 100% amplitude of the vibrations
Water glass modification with the colloidal solution of ZnO nanoparticles in propanol confirmed the effect of modifier on the water glass wettability of sand
Descriptive statistics for measuring the surface area the primary precipitates of intermetallic phases IM_W\ κ I (Sap_IM_W\ κ I, μ m 2 ) depending on the annealing time ( τ _ia,
As a result show that plus shape building displaced more, these may be due to lesser weight and slender geometry as in comparison to other plans of buildings
Basing on the results of MANOVA test it has been observed that the strongest significant effect on an increase of the tensile strength R m exerted the addition of Mg, followed by