Mat. Res. vol.17 número5

This work analyzes the influence of the heating rate on the kinetics and microstructural evolution of austenite formation in the continuous heating of a low carbon steel with

The susceptibility of a duplex stainless steel UNS S31803 to thermal embrittlement at 475 °C was evaluated by means of mechanical tests (impact energy and hardness),

This work focuses on the effects of the carburizing temperature and time on the mechanical properties of mild steel carburized with activated carbon, at 850, 900 and 950

In the present work, surface hardness of the plasma nitrided CA-6NM martensitic stainless steel samples was determined by nanoindentation technique, for different

XPS, XRD and Laser Raman Analysis of Surface Modified of 6150 Steel Substrates for the Deposition of Thick and Adherent Diamond-like Carbon Coatings.. William de Melo Silva a *,

Effect of heat input on mechanical and metallurgical properties of AISI:410S lean super martensitic stainless steel weld joint by GTAW process was investigated.. Based on the

The purpose of this work is to present a three-dimensional beam element for the structural and thermal analysis of reinforced concrete, steel and composite steel and

This work presents a simple, fast and low-cost methodology for the simultaneous determination of paracetamol (PC) and ibuprofen (IB) in pharmaceutical formulations by